Newsbin Pro Setup Guide for UseNeXT
This guide will walk you through setting up Newsbin Pro to work with UseNeXT news servers. If you haven't already signed up for Usenet access then consider UseNeXT. They offer 1,014 days of binary retention, SSL encryption and up to 30 connections. UseNeXT is currently offering new customers a 14 day, 300 GB free trial so if you haven't signed up for Usenet access this is a great chance to get started.
Step 1 - Install Newsbin Pro
If you haven't already installed Newsbin then you have an opportunity to enter the UseNeXT server information during the installation.
Figure 1 - Newsbin Pro install (news server name)
A - The first step is to assign a name to the server. We suggest using UseNeXT in case you use multiple Usenet providers.
Figure 2 - Newsbin Pro install (news server info)
A - server address:
news.usenext.com
B - Check Use SSL if desired
C - Check the Login box as UseNeXT requires authentication.
Figure 3 - Newsbin Pro install (login info)
A - Enter Username (provided in email)
B - Enter Password (provided in email)
OR
If you have already installed Newsbin Pro and didn't get the news server and login information then you can do it from within Newsbin Pro.
Figure 4 - Newsbin Pro setup (Utilities - Servers)
A - Once Newsbin Pro is open click Utilities - Server as shown above. This will bring up the Server Options page shown below.
Figure 5 - Newsbin Pro setup (Server Options)
The server options screen includes everything you need to get up and running. Simply enter the information as follows:
A - Click on New Server
B - Click to Enable Server
C - Server Address: enter in news.usenext.com
D - Connections: UseNeXT supports up to 30 connections.
E - Check Requires Login
F - Enter Username (provided in email)
G - Enter Password (provided in email)
H - Check Use SSL if desired
I - Check Set SSL Port if you desite an alternate port
J - Port: use port 563 for secure or port 119 for standard connections.
It's that simple to configure Newsbin Pro for UseNeXT. Enjoy!
